Honda Power Equipment WB30
Call for Price
Key Features
Availability
In Stock
LocationDenny's Lawn & Garden
Condition
Excellent
Product Features
Description
Key Features
- General purpose, centrifugal 3" pump
- Easy starting Honda OHV commercial engine
- 290 gal./min. capacity
- Silicon carbide mechanical seal
- Cast iron volute and impeller
Features
- Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
- Durable silicon carbide mechanical seal: The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
- 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
- Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
- Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
- Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
- Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
- 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
- Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
- Engine: GX160
- Displacement: 163cc
- Bore and stroke: 2.7 in. x 1.8 in.
- Compression Ratio: 9.0:1
- Oil Alert: Std
- Pump type: Centrifugal, Self-priming
- Volute: Rigid Mounted Cast Iron
- Impeller: 4 Vane Cast Iron
- Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
- Priming time: 150 sec @16.4 ft.
- Drive system: Direct
- Discharge capacity: 290 gpm
- Suction port diameter: 3 in. NPT
- Discharge port diameter: 3 in. NPT
- Total head lift: 85 ft.
- Suction head lift: 25 ft.
- Maximum pressure: 37 psi
- Solids handling: N/A
- Dimensions (LxWxH): 20.1 in.x 15.2 in. x 17.9 in.
- Dry weight: 57 lb.
- Fuel Capacity: 0.82 gal.
- Run Time @ Max Discharge: 1.9 hr
- Strainer Part #: 78325-YG4-000
- Residential Warranty: 3 years
- Commercial Warranty: 3 years
Accessories
- A wide variety of hose kits, couplers, adaptors, and other accessories are available.
NOTES:
WARNING: This product can expose you to chemicals including soots, tars, and mineral oils, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Engine
| Engine Manufacturer | Honda |
| Engine Displacement | 163cc |
| Bore and Stroke | 2.7 in. x 1.8 in. |
General
| Pump Style | Centrifugal, Self-priming |
| Impeller | 4 Vane Cast Iron |
| Drive System | Direct |
| Discharge Capacity | 290 gpm |
| Discharge Port Diameter | 3 in. NPT |
| Suction Diameter | 3 in. NPT |
| Head Lift | 85 ft. |
| Suction Head Lift | 25 ft. |
| Max Pressure | 37 psi |
| Weight | 57 lb. |
