2022 DR Power DR Stump Grinder (Manual Start) (ST45015DMN)

$1,799.00

Key Features

New/Used New

Availability In Stock

LocationDenny's Lawn & Garden

Condition Excellent

Product Features

Overview

Description

PRO

The easiest, fastest method of stump removal! The PRO Stump Grinder demolishes any sized stump, even tough hardwoods, in just minutes. With 8 carbide-tipped teeth and a world-class 9.2 HP (15.3 ft-lbs gross torque*) DR engine, this machine is ready to take out any stump.

Clutch

Clutch: Yes

Cutting

Number of Teeth: 8
Tooth RPM: 2800

Dimensions

Handlebar Height: Adjustable at 33", 37", 40"
Height: 39"
Length: 51"
Shipping Weight: 213 lbs
Weight: 148 lbs
Width: 29"
Shipping Dimensions: 54.75"L x 35.5"W x 45.25"H

Engine

Air Filter: Paper
Cooling Methods: Air
Displacement: 301 cc
Engine Shaft Diameter: 1"
Engine Type: OHV
Ft Lbs Torque: *15.3 ft-lbs gross torque (per SAE J1940)
Horsepower: 9.2 HP
Lubrication: Splash
Make: DR
Number Of Cylinders: 1
Oil Capacity: 37 oz
Oil Filter: No
Oil Type: 30W HD
Pre Cleaner: Yes
Starting Type: Manual
Choke/Primer: Choke

Fuel System

Fuel Capacity: 3.2 Qrts
Fuel Shutoff Valve: Yes

General

CARB Certified: Yes
Assembly: Yes
Optimized Using FEA For Strength: Yes

Wheels Tires

Brake: Yes
Dimensions: 15" x 4.75"
Number of Tires: 2
Tire Size: 15" x 4.75"
Tread: Saw Tooth
Wheel Brake with Lock: Yes

Warranty

Engine Warranty: 2 yrs Residential Use / 90 days Commercial
Machine Warranty: 2 yrs Residential Use / 90 days Commercial

Material

Cutting Blade Material: Replaceable carbide tipped teeth
Frame: 12 gauge
Grease Fittings: Yes
Handlebar Style: Height adjustable (with tools) 33", 37", 40"

Features

Simple Operation: Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving off an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.
Oversized tires roll over rough terrain: These lugged high-flotation tires make for easy transport and give the machine full support during operation. Large size (15" x 4.75") helps to keep machine elevated over wood chips during operation.
Mining-grade teeth: The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2800 rpm, these teeth take a remarkable 360 "bites" per second!
Engine: Our DR OHV engine with 9.2 HP (15.3 ft-lbs gross torque*) has the muscle to power through hardwood stumps of any size. Available with choice of manual- or electric starting.
Simple hand controls: Control the wheel brakes and engine throttle right from the handle bars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.